arpspoof

This repo extracts the arpspoof from the dsniff toolkit and lets it run on macOS

Installing

curl -LJO https://github.com/YeautyYE/arpspoof/releases/download/2.4b1%2Bdebian-29/arpspoof
chmod a+x arpspoof
mv arpspoof /usr/local/bin/
sudo arpspoof

Compiling

brew install cmake
brew install pkg-config
brew install libnet
brew install libpcap
ln -s /usr/local/opt/libpcap/lib/pkgconfig/libpcap.pc /usr/local/lib/pkgconfig/libpcap.pc
git clone https://github.com/YeautyYE/arpspoof.git
cd arpspoof
cmake . && make && make install
sudo arpspoof

synopsis

arpspoof [-i interface] [-c own|host|both] [-t target] [-r] host

-i interface
    Specify the interface to use.

-c own|host|both
    Specify which hardware address t use when restoring the arp configuration; while cleaning up, packets can be send with the own address as well as with the address of the host. Sending packets with a fake hw address can disrupt connectivity with certain switch/ap/bridge configurations, however it works more reliably than using the own address, which is the default way arpspoof cleans up afterwards.

-t target
    Specify a particular host to ARP poison (if not specified, all hosts on the LAN). Repeat to specify multiple hosts.

-r
    Poison both hosts (host and target) to capture traffic in both directions. (only valid in conjuntion with -t)

host
    Specify the host you wish to intercept packets for (usually the local gateway).